東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ subject:"Applied physics." ]

切換: 標籤 | MARC模式 | ISBD

Phototransistors Based on III-V Semi...

Rezaei, Mohsen.

FindBook

Google Book

Amazon

博客來

Phototransistors Based on III-V Semiconductors and Low-Dimensional Materials for High-Speed Imaging at High Operating Temperatures.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Phototransistors Based on III-V Semiconductors and Low-Dimensional Materials for High-Speed Imaging at High Operating Temperatures./
作者:	Rezaei, Mohsen.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	110 p.
附註:	Source: Dissertations Abstracts International, Volume: 80-10, Section: B.
Contained By:	Dissertations Abstracts International80-10B.
標題:	Applied physics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13428620
ISBN:	9781392028216

Phototransistors Based on III-V Semiconductors and Low-Dimensional Materials for High-Speed Imaging at High Operating Temperatures.
Rezaei, Mohsen.

Phototransistors Based on III-V Semiconductors and Low-Dimensional Materials for High-Speed Imaging at High Operating Temperatures. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 110 p.

Source: Dissertations Abstracts International, Volume: 80-10, Section: B.

Thesis (Ph.D.)--Northwestern University, 2019.

This item must not be added to any third party search indexes.

In this thesis, the optical gain mechanism in low-light conditions of phototransistor detectors (PTDs) is explored. An analytical formula is derived for the physical limit on the minimum number of detectable photons for PTDs. This formulation shows that the sensitivity of the PTD, regardless of its material composition, is related to the square root of the normalized total capacitance at the base layer. Since the base total capacitance is directly proportional to the size of the PTD, the formulation reflects the scaling effect on the sensitivity of the PTD. The model indicates that nanoscale PTDs (NPTDs) can reach single-photon sensitivity if their internal gain is high enough to cancel out the noise of the electronic readout circuit (ROIC). Our proposed model can be used to explore a wide range of PTDs, including nanowires, two-dimensional, and bulk devices. Low-dimensional (LD) materials including quantum dots, nanowires, and two-dimensional materials, have been extensively employed to fabricate photodetectors with detection wavelengths ranging from the infrared to ultraviolet region of the spectrum. Literature reports often highlight extremely high photo-responses stemming from large internal gain mechanisms, but the best reported low-dimensional photodetectors have not yet surpassed the performance of bulk photodetectors on the key metric of sensitivity. In chapter 3, we introduce a unified picture to study and extract the sensitivity of low-dimensional detectors. We show that the geometry and design of these detectors can be optimized to achieve significantly higher photon detection sensitivity that can in principle exceed that of the best existing photodetectors. InGaAs is the main material that is used for short wavelength infrared (SWIR) detection. InGaAs-based heterojunction phototransistors (HPTs) have been around for more than five decades. We show that 3D-engineered HPTs based on an InGaAs absorbing layer, characterized by nanoscale electronic area and a large optical area, can be used for the fabrication of sensitive SWIR imagers. These devices can reach single-photon noise equivalent power even at room temperature. To the best of our knowledge, this is the first comprehensive study on the sensitivity of the HPTs for imaging applications. Several focal plane array (FPA) based on InGaAs NHPTs were fabricated and tested. Arrays of 320 x 256 3D-egnineered HPT sensors with 2µm electronic area diameter and 30µm pixel pitch were used to make the sensor array. Despite the fact that the noise of the read-out circuity (ROIC) is almost 800 e-, our demonstrated FPA has only produced around 30 e- read noise. The reason for this noise reduction resides in the high internal gain (> 1000 e-/ph) of the HPT sensors, which practically cancels out the ROIC noise. The measured data show a very good agreement with the model predictions. We also studied the nonlinear relation between the gain and optical power in phototransistors. We have used a simple model based on Schottky-Read-Hall recombination of minority carriers at the base-layer to study this nonlinearity. We then explore the implications of this nonlinear relationship on the design of high-performance phototransistors. Three different HPT structures based on InGaAs collector layer, InP emitter layer, and base layers of different composition were grown, processed and measured. Gain and speed measurements show a large variation between these structures. The one with low-doped InGaAs base-layer has the highest gain at low optical illumination power, which makes it suitable for highly sensitive photodetection. The one with GaAsSb base-layer showed a high optical gain at the higher power of illumination, which makes it suitable for applications that require higher speed of operation. Our study shows that by controlling the carrier lifetime at the base layer, the phototransistor can be tuned to have the maximum gain at the desired optical power. Our modeling can be extended to a variety of detectors with internal gain such as nanowire detectors and detectors based on the 2D material.

ISBN: 9781392028216Subjects--Topical Terms:

3343996
Applied physics.

Phototransistors Based on III-V Semiconductors and Low-Dimensional Materials for High-Speed Imaging at High Operating Temperatures.
LDR:05334nmm a2200337 4500 001 2210708
005 20191121124300.5
008 201008s2019 ||||||||||||||||| ||eng d
020 $a 9781392028216
035 $a (MiAaPQ)AAI13428620
035 $a (MiAaPQ)northwestern:14502
035 $a AAI13428620
040 $a MiAaPQ $c MiAaPQ
100 1 $a Rezaei, Mohsen. $3 3437843
245 1 0 $a Phototransistors Based on III-V Semiconductors and Low-Dimensional Materials for High-Speed Imaging at High Operating Temperatures.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 110 p.
500 $a Source: Dissertations Abstracts International, Volume: 80-10, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Mohseni, Hooman.
502 $a Thesis (Ph.D.)--Northwestern University, 2019.
506 $a This item must not be added to any third party search indexes.
506 $a This item must not be sold to any third party vendors.
520 $a In this thesis, the optical gain mechanism in low-light conditions of phototransistor detectors (PTDs) is explored. An analytical formula is derived for the physical limit on the minimum number of detectable photons for PTDs. This formulation shows that the sensitivity of the PTD, regardless of its material composition, is related to the square root of the normalized total capacitance at the base layer. Since the base total capacitance is directly proportional to the size of the PTD, the formulation reflects the scaling effect on the sensitivity of the PTD. The model indicates that nanoscale PTDs (NPTDs) can reach single-photon sensitivity if their internal gain is high enough to cancel out the noise of the electronic readout circuit (ROIC). Our proposed model can be used to explore a wide range of PTDs, including nanowires, two-dimensional, and bulk devices. Low-dimensional (LD) materials including quantum dots, nanowires, and two-dimensional materials, have been extensively employed to fabricate photodetectors with detection wavelengths ranging from the infrared to ultraviolet region of the spectrum. Literature reports often highlight extremely high photo-responses stemming from large internal gain mechanisms, but the best reported low-dimensional photodetectors have not yet surpassed the performance of bulk photodetectors on the key metric of sensitivity. In chapter 3, we introduce a unified picture to study and extract the sensitivity of low-dimensional detectors. We show that the geometry and design of these detectors can be optimized to achieve significantly higher photon detection sensitivity that can in principle exceed that of the best existing photodetectors. InGaAs is the main material that is used for short wavelength infrared (SWIR) detection. InGaAs-based heterojunction phototransistors (HPTs) have been around for more than five decades. We show that 3D-engineered HPTs based on an InGaAs absorbing layer, characterized by nanoscale electronic area and a large optical area, can be used for the fabrication of sensitive SWIR imagers. These devices can reach single-photon noise equivalent power even at room temperature. To the best of our knowledge, this is the first comprehensive study on the sensitivity of the HPTs for imaging applications. Several focal plane array (FPA) based on InGaAs NHPTs were fabricated and tested. Arrays of 320 x 256 3D-egnineered HPT sensors with 2µm electronic area diameter and 30µm pixel pitch were used to make the sensor array. Despite the fact that the noise of the read-out circuity (ROIC) is almost 800 e-, our demonstrated FPA has only produced around 30 e- read noise. The reason for this noise reduction resides in the high internal gain (> 1000 e-/ph) of the HPT sensors, which practically cancels out the ROIC noise. The measured data show a very good agreement with the model predictions. We also studied the nonlinear relation between the gain and optical power in phototransistors. We have used a simple model based on Schottky-Read-Hall recombination of minority carriers at the base-layer to study this nonlinearity. We then explore the implications of this nonlinear relationship on the design of high-performance phototransistors. Three different HPT structures based on InGaAs collector layer, InP emitter layer, and base layers of different composition were grown, processed and measured. Gain and speed measurements show a large variation between these structures. The one with low-doped InGaAs base-layer has the highest gain at low optical illumination power, which makes it suitable for highly sensitive photodetection. The one with GaAsSb base-layer showed a high optical gain at the higher power of illumination, which makes it suitable for applications that require higher speed of operation. Our study shows that by controlling the carrier lifetime at the base layer, the phototransistor can be tuned to have the maximum gain at the desired optical power. Our modeling can be extended to a variety of detectors with internal gain such as nanowire detectors and detectors based on the 2D material.
590 $a School code: 0163.
650 4 $a Applied physics. $3 3343996
650 4 $a Electrical engineering. $3 649834
690 $a 0215
690 $a 0544
710 2 $a Northwestern University. $b Electrical Engineering. $3 3285556
773 0 $t Dissertations Abstracts International $g 80-10B.
790 $a 0163
791 $a Ph.D.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13428620