東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ subject:"Mechanical properties." ]

切換: 標籤 | MARC模式 | ISBD

Water-Assisted Mixing and Compressio...

Venkatesh, Abhijit.

FindBook

Google Book

Amazon

博客來

Water-Assisted Mixing and Compression Moulding of Ethylene-Acrylic Acid Copolymer Reinforced With Nano-Cellulose.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Water-Assisted Mixing and Compression Moulding of Ethylene-Acrylic Acid Copolymer Reinforced With Nano-Cellulose./
作者:	Venkatesh, Abhijit.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2018,
面頁冊數:	51 p.
附註:	Source: Dissertations Abstracts International, Volume: 81-09, Section: B.
Contained By:	Dissertations Abstracts International81-09B.
標題:	Mechanical properties. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27556819
ISBN:	9781085763233

Water-Assisted Mixing and Compression Moulding of Ethylene-Acrylic Acid Copolymer Reinforced With Nano-Cellulose.
Venkatesh, Abhijit.

Water-Assisted Mixing and Compression Moulding of Ethylene-Acrylic Acid Copolymer Reinforced With Nano-Cellulose. - Ann Arbor : ProQuest Dissertations & Theses, 2018 - 51 p.

Source: Dissertations Abstracts International, Volume: 81-09, Section: B.

Thesis (Licentiate)--Chalmers Tekniska Hogskola (Sweden), 2018.

This item must not be sold to any third party vendors.

The concerns regarding aspects of global warming, depleting oil resources, accumulation of plastics in landfills has served as motivation to move towards utilizing sustainable and renewable resources to fulfil our needs. In the present work, the reinforcing capabilities of cellulose nanofibrils (CNF) and modified/unmodified cellulose nanocrystals (CNC) based composites prepared through water-assisted mixing, drying and compression moulding was explored. At the water-assisted mixing, compositions consisting of an aqueous dispersion of a poly(ethylene-co- acrylic acid) copolymer, nanocellulose suspension and excess water of about 96 %, were used to prepare the composites. The final composites had a dry loading content of 10 to 70 vol.% CNF or 0.1 - 10 wt.% CNC.The CNF based composites showed an increase in strength and stiffness with increasing cellulose nanofibril content. At the highest loading content of 70 vol.% the composites exhibited an improved strength and stiffness by a factor of 3.5 and 21, respectively while still maintaining an elongation of 5 %. The composites with 20 vol.% cellulose content confirmed a well dispersed reinforcement in the matrix through computed tomography. The composites had a stiffening threshold around 30 vol.% CNF content which coincided with the CNF concentration at which the effective stiffness of the composite was maximum. Furthermore, the strength and strain at break of CNF composites were higher than pulp based composites but the same could not be said for the stiffness. The CNC based composites on the other hand showed a strong influence of the CNC on yield behaviour and ductility of the composites, especially at higher CNC contents (10 wt.%). Dynamic mechanical analysis revealed indications of strong interactions between the grafted components and the matrix or between the grafted components themselves which was confirmed by the mechanical test data. However, the improved thermal stability of the modified CNC (almost 100 °C improvement) was not observed when they were introduced into the composites owing to alkalinity of the matrix that resulted in degrafting.

ISBN: 9781085763233Subjects--Topical Terms:

3549505
Mechanical properties.
Subjects--Index Terms:

Cellulose nanofibers

Water-Assisted Mixing and Compression Moulding of Ethylene-Acrylic Acid Copolymer Reinforced With Nano-Cellulose.
LDR:03338nmm a2200361 4500 001 2272080
005 20201102111701.5
008 220629s2018 ||||||||||||||||| ||eng d
020 $a 9781085763233
035 $a (MiAaPQ)AAI27556819
035 $a (MiAaPQ)Chalmers_SE505088
035 $a AAI27556819
040 $a MiAaPQ $c MiAaPQ
100 1 $a Venkatesh, Abhijit. $3 3549504
245 1 0 $a Water-Assisted Mixing and Compression Moulding of Ethylene-Acrylic Acid Copolymer Reinforced With Nano-Cellulose.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2018
300 $a 51 p.
500 $a Source: Dissertations Abstracts International, Volume: 81-09, Section: B.
502 $a Thesis (Licentiate)--Chalmers Tekniska Hogskola (Sweden), 2018.
506 $a This item must not be sold to any third party vendors.
520 $a The concerns regarding aspects of global warming, depleting oil resources, accumulation of plastics in landfills has served as motivation to move towards utilizing sustainable and renewable resources to fulfil our needs. In the present work, the reinforcing capabilities of cellulose nanofibrils (CNF) and modified/unmodified cellulose nanocrystals (CNC) based composites prepared through water-assisted mixing, drying and compression moulding was explored. At the water-assisted mixing, compositions consisting of an aqueous dispersion of a poly(ethylene-co- acrylic acid) copolymer, nanocellulose suspension and excess water of about 96 %, were used to prepare the composites. The final composites had a dry loading content of 10 to 70 vol.% CNF or 0.1 - 10 wt.% CNC.The CNF based composites showed an increase in strength and stiffness with increasing cellulose nanofibril content. At the highest loading content of 70 vol.% the composites exhibited an improved strength and stiffness by a factor of 3.5 and 21, respectively while still maintaining an elongation of 5 %. The composites with 20 vol.% cellulose content confirmed a well dispersed reinforcement in the matrix through computed tomography. The composites had a stiffening threshold around 30 vol.% CNF content which coincided with the CNF concentration at which the effective stiffness of the composite was maximum. Furthermore, the strength and strain at break of CNF composites were higher than pulp based composites but the same could not be said for the stiffness. The CNC based composites on the other hand showed a strong influence of the CNC on yield behaviour and ductility of the composites, especially at higher CNC contents (10 wt.%). Dynamic mechanical analysis revealed indications of strong interactions between the grafted components and the matrix or between the grafted components themselves which was confirmed by the mechanical test data. However, the improved thermal stability of the modified CNC (almost 100 °C improvement) was not observed when they were introduced into the composites owing to alkalinity of the matrix that resulted in degrafting.
590 $a School code: 0419.
650 4 $a Mechanical properties. $3 3549505
650 4 $a Nanocrystals. $3 605740
650 4 $a Tomography. $3 836553
650 4 $a Acids. $3 922327
650 4 $a Materials science. $3 543314
650 4 $a Plastics. $3 649803
650 4 $a Rheology. $3 570780
650 4 $a Cellulose. $3 588995
650 4 $a Sustainable materials. $3 3549506
650 4 $a Polymer chemistry. $3 3173488
650 4 $a Nanoscience. $3 587832
653 $a Cellulose nanofibers
653 $a Nanocellulose
653 $a Water-assisted mixing
653 $a Amphiphilic co-polymer
690 $a 0495
690 $a 0565
690 $a 0794
710 2 $a Chalmers Tekniska Hogskola (Sweden). $3 1913472
773 0 $t Dissertations Abstracts International $g 81-09B.
790 $a 0419
791 $a Licentiate
792 $a 2018
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=27556819